| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
New and Used ISUZU 10m3 12m3 14m3 Compactor Garbage Truck with Rear Bucket Lifting System
1. ISUZU 8CBM 10CBM 12CBM garbage compactor truck brief introduction
Garbage Compactor Truck is a type of dry or bio-toilet which is designed to convert the human refuse and excreta in to compost. It is provided with in-built sewerage mechanisms that can be easily connected to external drainage systems to ensure its sturdiness and easy usage.
By condensing garbage, so that it takes up less space in the body of the vehicle, the garbage truck compactor increases the amount of trash that can be transported before being discharged, allowing waste hauling companies to maximize the number of daily pickups.
The trash compactor has a compression chamber that runs along the length of the truck and has a discharge opening at one end and a feed opening at the other. In the compression chamber, there is a ram that is driven by hydraulics. Its job is to pack the trash to a certain density and pressure by moving back and forth. At the chamber's discharge opening, there is a door that can be moved manually between an open and a closed position. When the door is closed, the trash is pressed against it.
A hydraulic compactor is a machine that uses hydraulic pressure to compress materials. The force of a standard garbage truck compactor is approximately 2,750 psi (pounds per square inch).
Garbage trucks are designed to collect different types of rubbish using different components. The rear loader garbage truck is the most common type of garbage truck, and it is used in most residential areas to collect trash cans curbside. Such vehicles typically feature a hydraulic lift that raises and lowers trash cans into a hopper at the rear of the truck. A garbage collector may operate a set of buttons and levers mounted on the exterior of the vehicle to control this operation.
When the hopper is full, a hydraulic mechanism scoops the trash into the truck's compacting section. The garbage truck compactor then reduces the amount of space that the refuse occupies in the truck's body. The cycle continues until the truck's body is full.
4. Compactor garbage truck Chassis option: DFAC, FAW, SINOTRUCK HOWO, FOTON, SHACMAN, JAC, ISUZU, etc.
| Emission Standard | Euro 5 | |
| Model type | Garbage truck compactor type | |
| Chassis model | ISUZ QL1110ANLAY | |
| Driving Type | 4×2 | |
| Dimensions | ||
| Wheelbase(mm) | 4175 (4475mm is optional) | |
| Overall Dimension(mm) | 7450x2380x2850(mm) | |
| Garbage body volume (m3) | Effective volume 9m3 | |
| Weights parameter | ||
| GVW(kg) | 10,550kgs | |
| Max.allowed payload (kg) | 10,000kgs | |
| Curb weight(kg) | 7,950kgs | |
| Front axle(T) | 4Ton drum type | |
| Rear axle load(T) | 7Ton drum type | |
| Tread (Front/rear) (mm) | 1680/1650 | |
| Front / rear overhang(mm) | 1110/1780 | |
| Max speed(km/h) | 110 | |
| Vehicle Frame,suspension | ||
| Frame | Single-deck frame | |
| Suspension | Front and rear strengthen leaf spring suspension | |
| Tire | 235/75R17,total 7 tires( 6 tires + 1 spare tire) | |
| Engine | ||
| Engine model | 4HK1-TCG60 from ISUZ China | |
| Engine type | 4 stroke,direct injection,4 cylinder in-line,supercharge inter-cooler,common rail,diesel engine | |
| No. of cylinders | Straight-4 cylinders | |
| Displacement(L) | 5.193L | |
| Engine power(kw) | 139kw/190PS | |
| Max.torque(N.m/rpm) | 507N.m@1600-2600rpm | |
| Drive Line parameter | ||
| Clutch description | Dry single plate,hydraulic control booster,mechanical operation with hydraulic assistance | |
| Transmission | ISUZ MLD 6 forwarder,1 reverse gear, Manual operation | |
| Braking system | Service brake: Air brake system,with ABS | |
| Assistant brake: WEVB(Engine exhaust brake) | ||
| Park brake: Spring brake | ||
| Steering wheel | Power steering assistance,LHD or RHD | |
| Cab description | ||
| 1.ISUZ 700P 3X,one and half, air conditioner,electrical window,MP3,radio,USB interface 2.With central lock,elctric windows,english instrument panel,safty belt,3 persons allowed 3.The cab can reversible forwardly,rear middor heating system |
||
| 10-12CBM compression garbage truck upper body specifications | ||
|
Garbage body
|
||
| Garbage container/volume(CBM) | About 10-12CBM | |
| High corrosion resistance Q345 Mn steel 5mm thickness of body base,4mm celling,4mm floor, 5mm of side wall,6mm side Guides |
||
| Garbage container shape | New style arc-shaped | |
| The garbage container material | Q345 Mn steel | |
| Front body/underbase | Waste water collection tank,stainless steel made | |
| Garbage body mounting | Mounted on truck chasis with Rgid type by u-bolts and junction plate | |
| Ejection plate/push shovel | 5mm Q345 Mn | |
| Hopper floor | High tensile steel sheet | |
|
Tailgate
|
||
| Hopper capacity | 0.9-1.2m3 | |
| Hopper bottom/side/shovel blade | 6mm/4mm/6mm Q345 Mn | |
| Garbage container lift device | Suitable for 120L,240L,480L,600L waste bins | |
| Lifting of tailgate | Connected to body and operated by hydraulic cylinder | |
| Safety valve | On each rear side of body,for emergency case | |
| Additional equipment | 2 steel mudguard with rubber flaps at rear ends 1 rotation beacon light at the tailgate 2 foldable rear footboard for operator srand on 1 LED/halogen worklight on the tailgate Grab handle on each side of tailgate Automatic safety lock 6 Nos of side light |
|
|
Hydraulic system
|
||
| Hydraulic power | Supplied by hydraulic pump from PTO mounted on transmission shaft | |
| Working pressure(Mpa/bar) | 18Mpa/180 bar | |
| PTO & Hydraulic pump | 60L | |
| Hydraulic oil tank | 80-110L | |
| Operation | Hydraulic control at rear side of hopper Ejection/shovel control at side of body Tailgate lifts control at side of body |
|
| Hydraulic cylinder | The tailgate movement controled by 2 double action hydrulic cylinder and with safety device to prevent any emergency case occured Hydraulic cylinder designed to fit for the cycle time and compression ratio to GB/T3639-2000 |
|
| Nos of Hydraulic cylinder | 2 double bin lifter cylinder 2 double shovel scraper cylinder 1 single push shovel telescopic cylinder 2 tailgate lift cylinder 2 panel cylinder |
|
| Pipe & hose | Pipes made of high qualityhoned drawn steel pipe with high anti-corrosion performance All hydraulic pipe & hose meet ASE100R2 |
|
|
Operation & Control
|
||
| Operation | By means of hydraulic cylinder,system can be operated by manual and Automatic | |
| Control | All control by manual and automatic | |
| Loading/unloading cycle time(s) | About 30s | |
| Loading/unloading cycle time(s) | About 30s | |
| Feeding cycle time(s) | About 15s | |
| Garbage upload/discharge cycle time(s) | About 30s | |
| Multiple directional control valve | China famous brand | |
| Hydraulic oil pump | China famous brand | |
| Power take off | Made in China | |
| Hydraulic oil cylinder | China famous brand | |
| Electrical control system(PLC) | SIEMENS PLC or China brand | |
| Engine power control | Automatic control | |
| LCD monitor | 360 degree LCD monitor in the cab | |
| Other special function | ||
| 1.New breakable scraper designed by our factory 2.Bidirectional peristalsis compression character 3.Equipped with middle and rear double sewage tanks to avoid secondary pollution 4.Shovel slider and skateboard slider are high quality MC nylon 5.The filler lift cylinder is equipped with a balancing valve 6.High profile light, side light, working light |
||
1> Packaging: Nude,but waxed before shipment in our factory.
2> Shipping: Small type can be put into 20' or 40' container, big type must be shipped by bulk carriers or ro-ro ship or according to your requirements.
1. We are the biggest professional special trucks manufacturer in China,being in this field for 10 years.
2. We can supply more than 300 kinds of special trucks for your needing.
3. OEM Sevice: we can produce the trucks according to your request,such as the material,the size,the colour and the logo is optional for you.
1> Our company has solid technology, flawless inspection, advanced equipment, reliant quality and flexible modes operation.
2> We have roundly passed the certification of ISO9001-2008, the 3C (China Compulsory Certification) and other certifications that export needed.
3> We have more than 2000 workers and factory is more than 690,000m2, we have successfully exported to Ghana, Sudan, Kuwait,Nigeria, Angola ,Tajikistan, Azerbaijan,Namibia, Burma, Korea, Iran, Afghanistan,Iraq, Philippines ,Vietnam , Saudi Arabia ,Mexico,Chile ,Bolivia etc. more than 5000 trucks to many Africa & Asia countries.
4> We can produce 12,000 trucks every year, our brand "CLW" obtain "the Chinese well-known trademark".
5> We cooperate with famous chassis manufacturers, such as DONGFENG, FAW, FOTON, JMC, JAC, and NAVECO, etc.
Welcome to visit ChengLi Special Automobile Co.,Ltd !
){kind=link}